Hooke Park material passport
Granularity: item · still unworkedStill unworked. Held piece by piece because the most demanding use so far proposed for these forks, the forked supports of the Wood Store platform, would depend on the geometry of each piece. A finer level can still be measured again and entered under a new date.

HP-26-F13

Fork, species not determined

Uncovered, elsewhere on campus Plan of Hooke ParkUncovered, elsewhere on campusdate not recorded QR code https://passport.orbiting.cc/p/hp-26-f13

Tag legend How each value is knownMMeasuredMeasured with an instrument by the person who made the record.EObserved by eyeJudged by looking at the piece: a person's reading, not a measurement.RReconstructed from photographs or remainsWorked out afterwards from photographs, models or the marks left on the piece.~EstimatedAn approximate value, not measured.SReported, unverifiedSaid by someone (an interview, a conversation); not yet checked against the piece.?Done by others, to be checkedFrom another team's work or record; this record has not checked it.DDocumented, checkedFrom a published or archived document, and checked against the piece.Kinds of blank–Not applicableThe field does not apply to this piece.○Not yet recordedNot written down yet, but it can still be; the person named would supply it.×Done but not recordedThe work was done and nobody wrote it down; it cannot be recovered now.◇Recorded but lostIt was written down once, but the record is missing; it may yet be found.//Chain breaks hereNothing reaches further back; the last known point is given.

Photographs

HP-26-F13/files/photo-1Photograph 1
HP-26-F13/files/photo-2Photograph 2
HP-26-F13/files/photo-3Photograph 3
○to be filled

Basic information

What it is
Fork, species not determined
E
Quantity
One piece, recorded on its own
M
Where it is now
Uncovered, elsewhere on campus
as ofto be filled
E○

Current condition

Dimensions and geometry
to be filled
○
Moisture content
Stable enough that no kiln drying was needed before use
as ofto be filled
M○
Rot and defects
to be filled
○
Visual assessment
to be filled
○

Model

HP-26-F13/files/modelPhotogrammetric model
○to be filled

Where it came from

Source
Salvaged; where it was before is not known
R
How it got here //To be supplied by: no one now living can supply thisLast known: Found in the dormant pile brought back from beside the old Woodchip Barn site
NodeWhat is knownSource
Earlier originUnknown. Every scanned Woodchip Barn fork was drilled with locating holes; this piece carries none, and its model, set against the twenty-five scans published with the Woodchip Barn truss, matched none of themR
Lying near the old Woodchip Barn siteCame back with the dormant pileS
Retrieved by telehandlerM
Dormant pileM

The chain breaks at the first node. Last known: found in the dormant pile brought back from beside the old Woodchip Barn site.

History

Chain breaks here
Earlier working, if any
To be supplied by: no one now living can supply this
//
date to be filled
Retrieval
Basis
Location given by the tutor and the forester
What changed
Moved from beside the old Woodchip Barn site to campus
Result
Dormant pile on site
S
date to be filled
Photogrammetry
Basis
Each piece modelled from every side while still unworked
What changed
Nothing removed
Result
Model of this piece
M
date to be filled
Moisture content measured
Basis
Across the pile while it lay sheeted by the sawmill shelter
What changed
Nothing removed
Result
Stable; no kiln drying needed before use
M
date to be filled
Condition survey
Basis
Rot and open cracks read from the scan models and photographs, checked up close
What changed
Nothing removed
Result
Dated condition
E
date to be filled
Model and outline comparison
Basis
The first of the pieces without locating holes to be dealt with, once the holed forks had been scanned. Its model and outline set against the twenty-five scans published with the Woodchip Barn truss
What changed
Nothing removed
Result
Matches none: not from the Woodchip Barn
R
date to be filled
Moved for a campus event
What changed
Pile cleared from the sawmill shelter
Result
Now uncovered elsewhere on campus; earlier values keep their dates and the present state is not yet re-measured
E

What this piece has been

Not from the Woodchip Barn. It was the first of the pieces without locating holes to be dealt with: modelled once the holed forks had been scanned, then compared by model and outline with the twenty-five published scans, and it matched none. What it was before the dormant pile is not known, and no line of evidence now open reaches further back.

Background and further reading

Further reading

This is general research on tree forks. It is not an assessment of this piece.

Mollica, Zachary, and Martin Self · 2016   paper Online ↗

Source of the 204 / 25 / 20 counts, the locating holes and milled faces, and the published elevations of the 25. Values taken from it are inherited from another project's record, not produced here.

Mollica, Zachary · n.d.   portfolio

p. 47 shows which scanned fork went to each position of the built truss, 9.1F, and leaves out five: 08_A03, 08_A13, 10_E01, 10_E07, 11_A29. p. 60 lists the twenty used, but swaps G with I and J with L; the model of the built truss and pp. 47–49 agree with each other. p. 45 charts which forks were in each arrangement. No publication year; the public link is still to be recorded.

Annotation7 sourced · 9 blank

7 entries carry a source; 9 cells are blank, each with its kind of gap and the person who would have to supply it.

Sourced
granularity, location, machining_state, moisture, quantity, wb_confidence, what
defects
○to be filled
dimensions
○to be filled
geometry file
○to be filled
location date
○to be filled
moisture date
○to be filled
origin chain
//To be supplied by: no one now living can supply thisLast known: Found in the dormant pile brought back from beside the old Woodchip Barn site
photos
○to be filled
visual note
○to be filled
wb fork id
–
HP-26-F13
https://passport.orbiting.cc/p/hp-26-f13

If the tag on the piece is lost, print this code and fix it back on. Download the tag (50 mm wide)