Hooke Park material passport
Granularity: item · still unworkedStill unworked. Held piece by piece because the most demanding use so far proposed for these forks, the forked supports of the Wood Store platform, would depend on the geometry of each piece. A finer level can still be measured again and entered under a new date.

HP-26-F06

Beech fork

Uncovered, elsewhere on campus Plan of Hooke ParkUncovered, elsewhere on campusdate not recorded QR code https://passport.orbiting.cc/p/hp-26-f06

Tag legend How each value is knownMMeasuredMeasured with an instrument by the person who made the record.EObserved by eyeJudged by looking at the piece: a person's reading, not a measurement.RReconstructed from photographs or remainsWorked out afterwards from photographs, models or the marks left on the piece.~EstimatedAn approximate value, not measured.SReported, unverifiedSaid by someone (an interview, a conversation); not yet checked against the piece.?Done by others, to be checkedFrom another team's work or record; this record has not checked it.DDocumented, checkedFrom a published or archived document, and checked against the piece.Kinds of blank–Not applicableThe field does not apply to this piece.○Not yet recordedNot written down yet, but it can still be; the person named would supply it.×Done but not recordedThe work was done and nobody wrote it down; it cannot be recovered now.◇Recorded but lostIt was written down once, but the record is missing; it may yet be found.//Chain breaks hereNothing reaches further back; the last known point is given.

Photographs

HP-26-F06/files/photo-1Photograph 1
HP-26-F06/files/photo-2Photograph 2
HP-26-F06/files/photo-3Photograph 3
○to be filled

Basic information

What it is
Beech fork
ED
Quantity
One piece, recorded on its own
M
Where it is now
Uncovered, elsewhere on campus
as ofto be filled
E○

Current condition

Dimensions and geometry
to be filled
○
Moisture content
Stable enough that no kiln drying was needed before use
as ofto be filled
M○
Rot and defects
to be filled
○
Visual assessment
to be filled
○

Model

HP-26-F06/files/modelPhotogrammetric model
○to be filled

Where it came from

Source
Salvaged from the Woodchip Barn, Hooke Park (built 2016, taken down 2023)
R

Detail

Woodchip Barn number
12_B10
R
Position in the Woodchip Barn
outer chord, position B
HP-26-F06/files/wb-positionThe Woodchip Barn model, with this fork highlighted
The Woodchip Barn model with this fork highlighted. Diagram by Zhirui Zhang, drawn on the model by the Woodchip Barn Team.
D
Locating holes and machined faces
to be filled
HP-26-F06/files/tracesLocating holes and milled faces, marked on a photograph or the model
○
How it got here R
NodeWhat is knownSource
Standing beech at Hooke Park, surveyed photographically204 trees surveyed, felling yielded 25 usable forks?
Woodchip Barn, 201620 of the 25 were built into the truss, each matched to a position?
DismantlingNothing was recorded: not how many forks came back, not where they were stacked×
Lying near the old Woodchip Barn siteLocation learned from the tutor and the foresterS
Retrieved by telehandlerM
Dormant pileClassified by locating holes and machined facesR

History

2016
Photographic survey of standing trees and felling
Basis
204 standing beech surveyed; felling yielded 25 usable forks
What changed
Tree to fork
Result
One of the 25
?
date to be filled
Retrieval
Basis
Location given by the tutor and the forester
What changed
Moved from beside the old Woodchip Barn site to campus
Result
Dormant pile on site
S
date to be filled
Photogrammetry
Basis
Each piece modelled from every side while still unworked
What changed
Nothing removed
Result
Model of this piece
M
date to be filled
Moisture content measured
Basis
Across the pile while it lay sheeted by the sawmill shelter
What changed
Nothing removed
Result
Stable; no kiln drying needed before use
M
date to be filled
Condition survey
Basis
Rot and open cracks read from the scan models and photographs, checked up close
What changed
Nothing removed
Result
Dated condition
E
date to be filled
Classification by locating holes and machined faces
Basis
A first set of holes and no milled faces means one of the five the publications name as unused (08_A03, 08_A13, 10_E01, 10_E07, 11_A29); two sets with milled faces means one of the twenty built; no holes at all means the piece is not from the Woodchip Barn
What changed
Nothing removed
Result
Attribution for this piece
R
date to be filled
Moved for a campus event
What changed
Pile cleared from the sawmill shelter
Result
Now uncovered elsewhere on campus; earlier values keep their dates and the present state is not yet re-measured
E

Projects

Woodchip Barn · one of the twenty-five forks felled for the truss · outer chord, position B · 2015-2016

What this piece has been

The Woodchip Barn's making is documented down to the individual fork, but the documentation was never attached to the material: no fork carries its number. Every one of the twenty-five was drilled with a first set of three locating holes before scanning, and the twenty that went on to the robot bear a second set and milled end faces. Those traces are what classify this piece.

Background and further reading

Further reading

This is general research on tree forks. It is not an assessment of this piece.

Mollica, Zachary, and Martin Self · 2016   paper Online ↗

Source of the 204 / 25 / 20 counts, the locating holes and milled faces, and the published elevations of the 25. Values taken from it are inherited from another project's record, not produced here.

Mollica, Zachary · n.d.   portfolio

p. 47 shows which scanned fork went to each position of the built truss, 9.1F, and leaves out five: 08_A03, 08_A13, 10_E01, 10_E07, 11_A29. p. 60 lists the twenty used, but swaps G with I and J with L; the model of the built truss and pp. 47–49 agree with each other. p. 45 charts which forks were in each arrangement. No publication year; the public link is still to be recorded.

Annotation8 sourced · 8 blank

8 entries carry a source; 8 cells are blank, each with its kind of gap and the person who would have to supply it.

Sourced
granularity, location, moisture, origin_chain, quantity, wb_confidence, wb_fork_id, what
defects
○to be filled
dimensions
○to be filled
geometry file
○to be filled
location date
○to be filled
machining state
○to be filled
moisture date
○to be filled
photos
○to be filled
visual note
○to be filled
HP-26-F06
https://passport.orbiting.cc/p/hp-26-f06

If the tag on the piece is lost, print this code and fix it back on. Download the tag (50 mm wide)