Hooke Park material passport
Granularity: item · still unworkedStill unworked. Held piece by piece because the most demanding use so far proposed for these forks, the forked supports of the Wood Store platform, would depend on the geometry of each piece. A finer level can still be measured again and entered under a new date.

HP-26-F09

Beech fork

Uncovered, elsewhere on campus Plan of Hooke ParkUncovered, elsewhere on campusdate not recorded QR code https://passport.orbiting.cc/p/hp-26-f09

Tag legend How each value is knownMMeasuredMeasured with an instrument by the person who made the record.EObserved by eyeJudged by looking at the piece: a person's reading, not a measurement.RReconstructed from photographs or remainsWorked out afterwards from photographs, models or the marks left on the piece.~EstimatedAn approximate value, not measured.SReported, unverifiedSaid by someone (an interview, a conversation); not yet checked against the piece.?Done by others, to be checkedFrom another team's work or record; this record has not checked it.DDocumented, checkedFrom a published or archived document, and checked against the piece.Kinds of blank–Not applicableThe field does not apply to this piece.○Not yet recordedNot written down yet, but it can still be; the person named would supply it.×Done but not recordedThe work was done and nobody wrote it down; it cannot be recovered now.◇Recorded but lostIt was written down once, but the record is missing; it may yet be found.//Chain breaks hereNothing reaches further back; the last known point is given.

Photographs

HP-26-F09/files/photo-1Photograph 1
HP-26-F09/files/photo-2Photograph 2
HP-26-F09/files/photo-3Photograph 3
○to be filled

Basic information

What it is
Beech fork
ED
Quantity
One piece, recorded on its own
M
Where it is now
Uncovered, elsewhere on campus
as ofto be filled
E○

Current condition

Dimensions and geometry
to be filled
○
Moisture content
Stable enough that no kiln drying was needed before use
as ofto be filled
M○
Rot and defects
to be filled
○
Visual assessment
to be filled
○

Model

HP-26-F09/files/modelPhotogrammetric model
○to be filled

Where it came from

Source
Salvaged from the Woodchip Barn, Hooke Park (built 2016, taken down 2023)
R

Detail

Woodchip Barn number
08_D03
R
Position in the Woodchip Barn
outer chord, position GWoodchip Barn Team (2015–16)Woodchip Barn project filesHooke Park server, Woodchip Barn folder (01_ADMIN; 02_DRAWINGS; 03_PHOTOS; 06_PRESENTATIONS; 10_PROJECT PORTFOLIO; 12_3D Scanning). Copy held by the author.9.1F truss model, January–February 2016
HP-26-F09/files/wb-positionThe Woodchip Barn model, with this fork highlighted
The Woodchip Barn model with this fork highlighted. Diagram by Zhirui Zhang, drawn on the model by the Woodchip Barn Team.
D
Locating holes and machined faces
to be filled
HP-26-F09/files/tracesLocating holes and milled faces, marked on a photograph or the model
○
How it got here R
NodeWhat is knownSource
Standing beech at Hooke Park, surveyed photographically204 trees surveyed, felling yielded 25 usable forks?
Woodchip Barn, 201620 of the 25 were built into the truss, each matched to a position?
DismantlingNothing was recorded: not how many forks came back, not where they were stacked×
Lying near the old Woodchip Barn siteLocation learned from the tutor and the foresterS
Retrieved by telehandlerM
Dormant pileClassified by locating holes and machined facesR

History

2016
Photographic survey of standing trees and felling
Basis
204 standing beech surveyed; felling yielded 25 usable forks
What changed
Tree to fork
Result
One of the 25
?
date to be filled
Retrieval
Basis
Location given by the tutor and the forester
What changed
Moved from beside the old Woodchip Barn site to campus
Result
Dormant pile on site
S
date to be filled
Photogrammetry
Basis
Each piece modelled from every side while still unworked
What changed
Nothing removed
Result
Model of this piece
M
date to be filled
Moisture content measured
Basis
Across the pile while it lay sheeted by the sawmill shelter
What changed
Nothing removed
Result
Stable; no kiln drying needed before use
M
date to be filled
Condition survey
Basis
Rot and open cracks read from the scan models and photographs, checked up close
What changed
Nothing removed
Result
Dated condition
E
date to be filled
Classification by locating holes and machined faces
Basis
A first set of holes and no milled faces means one of the five the publications name as unused (08_A03, 08_A13, 10_E01, 10_E07, 11_A29); two sets with milled faces means one of the twenty built; no holes at all means the piece is not from the Woodchip Barn
What changed
Nothing removed
Result
Attribution for this piece
R
date to be filled
Moved for a campus event
What changed
Pile cleared from the sawmill shelter
Result
Now uncovered elsewhere on campus; earlier values keep their dates and the present state is not yet re-measured
E

Projects

Woodchip Barn · one of the twenty-five forks felled for the truss · outer chord, position G · 2015-2016

What this piece has been

The Woodchip Barn's making is documented down to the individual fork, but the documentation was never attached to the material: no fork carries its number. Every one of the twenty-five was drilled with a first set of three locating holes before scanning, and the twenty that went on to the robot bear a second set and milled end faces. Those traces are what classify this piece.

Background and further reading

Sources on this page

Woodchip Barn Team · 2015–16   archive

The team's working files, kept on Hooke Park's server: photographs, scans, models, drawings and spreadsheets. They are there but incomplete, and nothing in them is tied to the pieces themselves. Dates given from these files are the files' own dates. Cited so far: the team's proposed workflow in the Chip Store presentation (25 March 2015, p. 118; its last row is an early design stage), the scanning process sheet drawn on fork 12_A03 (15 July 2015), the two early models of 12_A03, with and without its bark (8 and 11 June 2015), a photograph of a log being debarked in the yard (14 July 2015), the comparison of four models of 09_G15 with the fork (9 July 2015), the per-fork scan models with their reference and check points (July 2015), the scan of 08_D02 and its 64 photographs (22 July 2015), the robot check of six forks: a photograph at the robot (17 July 2015), the 'Robot check' spreadsheet of the robot's readings (20 July 2015), the drawing comparing them with the models (23 July 2015) and a photograph in the Summerbuilders presentation (2 September 2015, p. 57), the assessment catalogue of twenty felled forks (3 August 2015), the models and fork lists sent to Arup (12 March, 30 April and 11 May 2015) and the emails with Arup's engineers (21 April–12 May 2015), the truss volume models (13–28 May 2015), the early truss made of sixty survey outlines (18 May 2015), the catenary centre line of 28 May 2015 kept in the model of the truss as built, the truss iterations (23 July–4 August 2015), the model of the truss as built, version 9.1F (January–February 2016), the team's three-step placement diagram (December 2015), the team's presentation of January 2016 with its speaker's notes (slides 34–43, 51, 63–72, 128), a video of Galapagos fitting a fork (30 May 2015), photographs of the robot finishing limb ends (23 September 2015), the robot task lists and fabrication photographs (September–November 2015), and the scan of 08_C05 (22–23 July 2015). For the Woodchip Barn's walls: the project calendars of 25 March and 14 May 2015, the estimate of the timber for the floor and the walls (14 May 2015), the Chip Store presentation (25 March 2015, p. 47), the January 2016 presentation's slides and speaker's notes on the walls (slides 12, 18–21, 118–123; slide 12 carries a photograph of 10 December 2015), the timber cutting list (12 May 2015), the photographs and count of felled timber at the roadside (5–6 June 2015), the emails with Arup's engineers on the walls (21 April and 11 May 2015), the wall model saved with two truss iterations (24 July 2015), the team's column diagram (February 2016), photographs of the columns being made (10–23 September 2015), of the slab being poured (6 November 2015) and of the truss lift, and the wall columns, planks and steel plates in the model of the Woodchip Barn as built, version 9.1F.

Further reading

This is general research on tree forks. It is not an assessment of this piece.

Mollica, Zachary, and Martin Self · 2016   paper Online ↗

Source of the 204 / 25 / 20 counts, the locating holes and milled faces, and the published elevations of the 25. Values taken from it are inherited from another project's record, not produced here.

Mollica, Zachary · n.d.   portfolio

p. 47 shows which scanned fork went to each position of the built truss, 9.1F, and leaves out five: 08_A03, 08_A13, 10_E01, 10_E07, 11_A29. p. 60 lists the twenty used, but swaps G with I and J with L; the model of the built truss and pp. 47–49 agree with each other. p. 45 charts which forks were in each arrangement. No publication year; the public link is still to be recorded.

Annotation8 sourced · 8 blank

8 entries carry a source; 8 cells are blank, each with its kind of gap and the person who would have to supply it.

Sourced
granularity, location, moisture, origin_chain, quantity, wb_confidence, wb_fork_id, what
defects
○to be filled
dimensions
○to be filled
geometry file
○to be filled
location date
○to be filled
machining state
○to be filled
moisture date
○to be filled
photos
○to be filled
visual note
○to be filled
HP-26-F09
https://passport.orbiting.cc/p/hp-26-f09

If the tag on the piece is lost, print this code and fix it back on. Download the tag (50 mm wide)